ProTee VX

The ProTee VX mounts overhead, forward of the tee, so it consumes no floor space at all. The trade is that it has to hang inside a fixed height band, which means a ceiling can be too tall as well as too short.

Verified specs

Sensor typeCamera
Where it sitsOverhead
Space behind the ball
Mount height above the hitting surface9 ft to 10 ftA ceiling above this range needs a drop mount rather than a different unit.
Mount position forward of the tee3 ft 3 in
Ball flight to the screen
Minimum ceiling heightProTee does not publish one. We check this unit against our own 8 ft floor instead.
Minimum room depth13 ftClearance behind the screen, plus ball flight, plus what the sensor and your backswing need behind the tee.
Hitting zone25 by 21 in
Indoor or outdoorIndoor only
Needs a computer
Weight
Battery

Placement figures read from The Indoor Golf Shop, ProTee VX on 2026-08-25. Retailer published.

A dash means the maker does not publish that figure. It never means we guessed one.

Software it works with

Compatibility is published by the software makers rather than by the sensor maker, so these are read from the software side.

Will it fit your room?

Checked against every unit we track, so you can see where this one sits rather than just whether it passes.

Loading the calculator.

Packages built around the VX

Most people buy the sensor as part of a package, because the enclosure, screen and mat have to work together and the room has to hold all of it.

What matters most?
PackageLaunch monitorRoom it needsPrice

ProTee VX SIG10 Golf Simulator Package

The Indoor Golf Shop · SIG10 Golf Simulator Enclosure

Lowest priceMost includedNo repositioning for lefties
ProTee VX$9,000See package

ProTee VX SwingBay Golf Simulator Package

Rain or Shine Golf · SwingBay 8x10 Enclosure

Smallest roomNo repositioning for lefties
ProTee VX11 ft wide, 15 ft deep, 8 ft 1 in ceiling$9,999See package

Carl's Ready-to-Golf ProTee VX Bundle

Carl's Place · Carl's Place DIY Golf Simulator Enclosure

No repositioning for lefties
ProTee VX$11,227See package

Carl’s ProTee VX Pro Golf Package

Carl's Place

No repositioning for lefties
ProTee VX$17,430See package

Room figures are the retailer’s own published minimum for that package, not our arithmetic. Where a retailer publishes none we fall back to checking the launch monitor and the enclosure separately and say so. We show one price and never a struck-through one, because a was-price is a claim about the past that we cannot check. Prices move often, so treat these as the figure on the date each package cites.

Who the VX suits, and who should skip it

Worth it if

  • Right and left handed golfers share the bay. Nothing needs repositioning between them.
  • Floor space is tight. Hanging forward of the tee, it consumes none.
  • You are building a permanent room rather than a setup that packs away.

Look elsewhere if

  • You cannot fix into the ceiling, or you rent.
  • Your ceiling sits outside the mount band. Too low rules it out, and too high needs a drop mount, which is a cost and a job.
  • You wanted to take it to the range. This one is an indoor unit.

Common mistakes buying a VX

Measuring to the finished ceiling instead of the mount point

The band is measured from the hitting surface to the sensor. A duct, a joist or a light in the way changes where the unit can actually hang, and that is the number that matters.

Buying before checking you can fix into the structure

These bolt to a joist and are heavy. A ceiling you cannot drill, or joists running the wrong way, turns a straightforward install into a framing job.

Budgeting for the sensor alone

A launch monitor is not a simulator. You still need an enclosure, an impact screen, a mat and usually a projector before you can play a hole. The complete builds on this page are the honest comparison, and the cost guide breaks down where the money goes.

Measuring to the wall instead of to the obstruction

This unit needs about 13 ft of depth at minimum. Measure to the nearest thing that actually stops you, which is often a water heater, a shelf or a garage door track rather than the wall itself. The room fit calculator checks your real numbers against every unit we track.

The VX against the EYE XO

At $6,499 the Uneekor EYE XO is the closest unit we track on price, which makes it the comparison most people are actually making. Both sit in the same place relative to the ball, so the room requirement is broadly similar and the decision comes down to what each one measures and costs to run.

ProTee VXUneekor EYE XO
Price$6,500$6,499
Where it sitsOverheadOverhead
Room depth needed13 ft13 ft
Annual planNot confirmedFrom $0 a year

The EYE XO costs less up front. Check both against your own room before comparing anything else. Full specs for the EYE XO.

What ProTee publishes, and what it does not

ProTee documents 3 of the 6 things a buyer needs to work out whether the VX fits a room. The rest you will find quoted confidently in plenty of places, but not by ProTee.

Published

  • the mount height band
  • the hitting zone size
  • a list price

Not published

  • a minimum ceiling height
  • the ball flight it needs to the screen
  • an accuracy claim

Where a figure is missing we check this unit against our own 8 ft floor instead and label the row as such, rather than borrowing a number from a shop or a forum. The reasoning is on how we verify.

Notes on this record

Price and the 25 by 21 in hitting zone confirmed by The Indoor Golf Shop on 2026-08-25, which independently matches the figure reported in earlier research. The 9 to 10 ft mount window is still pending confirmation on proteegroup.com. Because the space source is a retailer rather than ProTee, the calculator marks a ceiling outside that window as tight rather than ruling the unit out. Being ceiling mounted, it needs no repositioning between right and left handed golfers.

Common questions

How much room does the ProTee VX need?+

At minimum about 13 ft of depth. That is clearance behind the screen, plus ball flight, plus the space the sensor and your backswing need behind the tee. Width and ceiling depend on your enclosure as much as on the sensor.

What ceiling height does the ProTee VX need?+

It mounts overhead between 9 ft and 10 ft above the hitting surface. A ceiling above that range is not a dealbreaker, it needs a drop mount to bring the sensor into position.

Keep reading